International Full Size Jeep Association
Home Forums Reader's Rigs Tech Library Trail Stories FSJ-List
International Full Size Jeep Association  

Go Back   International Full Size Jeep Association > Tire Kickin' > General FSJ Discussion

Thread Tools Search this Thread Display Modes
Old 10-25-2020, 10:40 AM
Cliff's Avatar
Cliff Cliff is offline
350 Buick
Join Date: Mar 30, 2002
Location: Upper East Tennessee
Posts: 768
Rusty Metal Prep and Topcoating - SprayMax 2K

I have had good success with Ospho and POR-15 but the POR is expensive and not easily topcoated, plus it dries up too quickly in the can. I have read quite a bit about Eastwood Rust Encapsulator and another primer called SprayMax 2k Epoxy primer

I am working on my door jambs and inside panels and it's surface rust, but deep in a few spots. My routine is sand, then ospho, then sand again, then ospho again. A final fine sanding will be followed by Rust Encapsulator, then after curing apply the epoxy primer. Then topcoated in body color, after curing.

Just curious if any of you folks have used the SprayMax 2K, or if you have another epoxy primer you have used with good results. Older posts here seem to support the Eastwood product.
Cliff Danley
1977 Cherokee S

Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 04:19 AM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
corner corner