View Single Post
  #110  
Old 02-19-2022, 07:57 PM
scout4bta's Avatar
scout4bta scout4bta is offline
232 I6
 
Join Date: Apr 26, 2018
Location: SE Arizona
Posts: 176
Today was a good day.
Fabricated the vent tube for the rear axle and reinstalled the vent line with the factory vent cap.
Installed the +2" rear brake line on the axle.The "hole" for the bolt is almost .5", the bolt is 1/4". Had to fabracate a spacer to fill the hole.
Cleaned the rear brake line.
Removed the fuel lines and started modifiying the return. The main fuel line will be all new 3/8" CuNi (copper nickel).
__________________
1989 GW/91.5 Dodge W250 CTD flatbed/ 06 Ford Crown Vic Police Intercepter/05 Jeep Liberty Diesel.

Last edited by scout4bta : 02-20-2022 at 08:30 AM.
Reply With Quote