Thread: Shifter seal?
View Single Post
  #4  
Old 03-23-2021, 01:31 PM
mwood65's Avatar
mwood65 mwood65 is offline
258 I6
 
Join Date: Jul 17, 2017
Location: Payson Arizona
Posts: 428
Quote:
Originally Posted by Heep-J4000
It's missing a shifter booth and rubber plate with opening for the stick.

The booth is a square kind of booth and put into the floor opening upside down.

The seal on top is a flat piece , you could cut one out of a thin piece of flexible rubber plate.




Thanks for the quick reply!


I have the rubber piece on the floor as shown in pic but under that is just a hole in the sheet metal, you can see the ground through the rubber slot.


I figured there HAS to be something under the floor to seal the hole but can't find anything on sites for sale or anywhere else. I can't even find a picture so I know what I am dealing with.


This is what I have now ...


Reply With Quote