Gauge Cluster Touch-Up and Voltmeter Swap Write-Up
View Single Post
01-03-2012, 01:12 PM
Join Date: Jan 23, 2010
Location: Columbus, GA/Auburn, AL
Reassembling the unit is more or less the opposite of disassembly. However, make sure you use the emblem adhesive to reattach the labels that you touched up and your lenses (if they had fallen out). Let those dry for about an hour or so (according to directions of the adhesive that you use). before reinstalling the gauge cluster assembly into the housing.
Here is the order in which you should reassemble:
Blue/green bulb covers and indicator covers (brake/fasten belts, 4x4, etc)
Then, just put the AC assembly and cluster assembly back into the housing.
Easy as pie.
Thanks for reading! I hope this will be of help to at least one poor Jeeping soul. It's not perfect and I'm sure many of y'all can do this better than me, but figured I would put somethign out there. If there are any questions, comments, or concerns, let me know.
1976 Cherokee Chief Build
- Update 7/3/2014
Chief for sale - contact via PM if interested.
View Public Profile
Send a private message to Coryd55
Send email to Coryd55
Find all posts by Coryd55