View Single Post
Old 08-22-2005, 11:04 AM
TexasJ10's Avatar
TexasJ10 TexasJ10 is offline
360 AMC
Join Date: Jan 03, 2002
Location: Houston, Texas
Posts: 2,774

Something else you might do is take the lower drain plug out and stick a telescoping magnet in the hole. There is a magnet inside the case at this drain area and if alot of debris is in there from the bearings and retainers, you will be able to pull some out with the telescoping magnet. I did this once and a big piece of bearing retainer came out indicating a rebuild was definitely in order.
* 1981 stepside, 360, 727, 208, almost stock daily driver.
* 1982 Laredo j-10, 360, 727, in rough shape and in the process of being rebuilt with 401, NV4500, Klune,
. NP205,d60 front, d70 rear, fender work and minimal lift. It will probably take 10 years
* 1973 jcab mounted on 1983 j20 frame. 360/t18/208 d44/d60. Almost completed
Reply With Quote