International Full Size Jeep Association

International Full Size Jeep Association (http://www.ifsja.org/forums/vb/index.php)
-   General FSJ Discussion (http://www.ifsja.org/forums/vb/forumdisplay.php?f=11)
-   -   what did u do to your jeep this weekend (http://www.ifsja.org/forums/vb/showthread.php?t=88982)

Keman 08-18-2008 10:59 PM

So, now I have rebuilt the carb, cleaned up the engine some, replaced a belt, and am still needing to fix the exhaust leak. I started the paint this weekend by sanding and shooting the tan for the roof. (it was too hot outside to do much more than that)

She runs great, even did a death run test in stop and go traffic on I-5 through downtown Seattle in 90+ weather. She ran well, and took the heat without an issue.

Now the Kaiser is finally parked at my house so I can work on it whenever I like, instead of an hour away at my girlfriend's place.

mic63 08-19-2008 07:28 PM

Finished the front axle. New seals and bearings. Took it to a local Threshing show and got into the parade. Their was a long incline that worked out great. In 4WD low and first gear, I was abel to let it idle up hill. With all the other tractors thumpin and being the first vehicle behind the steam traction engines, you could'nt hear in running. A lot of thumbs up and suprised looks on peoples faces after the anouncers let them know it is a 1963. At the auto shows I hear "Nice Jeep". At the threshing shows I hear so many Jeep stories, it's a very fun time. This years best stories came from a guy that worked for Kaiser Jeep during the 1960's as a sales rep for the upper midwest states.

orangecherokee 08-19-2008 08:05 PM

finished putting the roof on my rig.

Justin Kerns 08-19-2008 08:18 PM

Finished my razor grill swap.

fulszjep 08-19-2008 08:25 PM

What I did to jeep
 
Bought tilt column from ebay. Column from a super or super custom wagon. Picked up winch and ramsey bumper. Got a chrome transfer case shift knob. Got a a/c unit that has the chrome package vents. Got my indicator lights red and green 2 light set up.

woody87 08-19-2008 08:27 PM

need help pickin a carb.
 
ok i am wondering what would put out better performance or mpg a holly truck avenger carb in 470 cfm or 670 cfm?

shimniok 08-20-2008 07:27 PM

Thankfull all I've done to it lately is drive it.

Long&Low 08-24-2008 02:49 PM

I mounted the 2000 TJ fuel tank in under the bed of my J10, worked out well. All need to do is plumb the lines and run the electric for the pump.

:thumbsup:

Chumley360 08-24-2008 03:16 PM

I got the G30 trailer hitch modified, welded, painted, and installed. I got the first coat of paint on the fenders and rocker, they'll need to be wet sanded and shot again I've got orange peel. Got most of the front face cleaned up, drilled, and welded before paint. And I've got a back ache.

401c.h.i.e.f. 08-24-2008 03:59 PM

went from stock on 35's :( :(



to bad a$$ on 38.5 mickeys on 15 x 14 alcos :cool: :thumbsup:


orangecherokee 08-25-2008 09:24 AM

painted the roof and began my center console. coming out pretty good so far.

bmoose 08-25-2008 09:45 AM

What I did to my Jeep?
 
Helped finish up the re-gearing. 3.54 now, from 2.87.
New bearings, seals, slik-um in the rear axle.
Repack all bearings in the front as well as new slik-um up front too.
Really pulls now!
Speedo is lots more accurate.
Now to see what my gas footage will be.:D

Josh D 08-25-2008 10:41 AM

Adjusted the timing
Added power steering fluid
Added a quart of oil
Ran to Home Depot and hauled home a new riding lawnmower:drivin:

chrisnsarah 08-25-2008 12:16 PM

Cut rotted floor out of the driver's side of '79. Was grinding old floor bondo to get to rust, but ran out of discs.

Cleaned up '67 timing chain parts, set the new set on the crank and cam, and ran out of time:(.

cavalryman40 08-25-2008 12:17 PM

Removed the cracked pig nose grill on my 1979 Wag, and installed a new to me $25.00 Razor grill I picked up at a estate sale this weeked.:)

Knuck 08-25-2008 12:21 PM

Pulled the Radiator so I could take it to the shop to have it flushed and the tanks resoldered. Also began the install of a Rhino grill. Also cleaned up and primed some rust spots.

Oh...I almost forgot. I also installed a new to my Son steering wheel. :thumbsup: He is happy now...except for the fact that he can't drive his truck til I get his radiator back from the shop.

Lindel 08-25-2008 12:35 PM

Ran it for a while to keep the battery up, minor tune up this coming weekend.

Looking to do a steering box/pump swap in October.

VonBoomenstien 08-25-2008 04:16 PM

Boxed the frame from the shock mounts back and added new plates for all the body mount points.

Knuck 08-25-2008 04:23 PM

Looks like we get to fork over some $$ for a new radiator. :banghead: I was hoping it was just a solder joint on the top tank. Turns out we had some bad tubes as well.

NCOfab 08-25-2008 05:34 PM

check my pics on the cherokee i added a hand full more of my body work progress


All times are GMT -6. The time now is 10:55 AM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.