Announcement

Collapse
No announcement yet.

Sniper EFI WOT timing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pickledtoast
    replied
    The initial 15 was updated to 22 to get more vacuum at idle. I'd post a screenshot but that's difficult on this site.

    The current ignition map, following the above video, has ignition timing at idle around 20. Works well after adjusting my cam timing.

    Leave a comment:


  • Carbinekid
    replied
    Thank you for the initial baseline.

    Leave a comment:


  • pickledtoast
    replied
    Touchpad wizard I initially went with 15 idle, 36 cruise, 32 WOT. But the wizard created timing map is scary. It looks like this with your three entered values:



    Use the free sniper efi software and a SD card to create/upload a good ignition map. I also smoothed out the target AFR table, etc.
    This is a good video:
    https://www.youtube.com/watch?v=jDyA3yTeB5w

    Leave a comment:


  • Carbinekid
    replied
    I’m at the same step what did you end up going with?

    Leave a comment:


  • jmac197
    started a topic Sniper EFI WOT timing

    Sniper EFI WOT timing

    Subject pretty much says it.



    I just finished installing my Sniper and was going thru the initial set up. What are you guys using for your WOT timing setting


    Thanks
Working...
X