Front Shackle Reversal-bolt on kit

[ShagWagon]

He left this on the other site. Don't seem like he replies here.

http://rocklaurencevintageautoparts....ackle-reversal

[rocklaurence]

We are selling a lot of FSSRs with the front receiver--now stronger than ever

[InternationalMarineBrian]

Originally Posted by rocklaurence

I just posted the rear lift blocks along with U-bolts. Now, you can have an affordable lift kit for $259 that doesn't require new shocks, drive shaft modifications (in most cases) or rides like a Covered Wagon from the cowboy days You can save on buying the FSSR, front receiver and rear lift blocks as a complete kit. PM on what you want.

What's the price for the package?

[rocklaurence]

IFSJA members get 10% off and free shipping East of Mississippi when ordering from my site. rocklaurencevintageautoparts.com

[rocklaurence]

Tax returns are coming in an enabling us to purchase items for our FSJs! Note: visit my store before ordering because the prices and some of the parts have changed since the original posts. For example: the front receiver Hitch tube is located under the mount--this location makes it stronger and allows it the clear EOM bumpers.

[rocklaurence]

I have full inventory of FSSR and Shifters

[rang-a-stang]

I installed a set of the FSSRs in my Cherokee and love them. Well made, good instructions. Know you will need to get your front driveshaft extended and longer soft brake lines when planning your install. I would happily recommend these to anyone looking for a comfy riding ~2"'s of lift.

[rocklaurence]

We are soon going to release a Long Spring front suspension that uses the FSSR brackets. This setup will provide 4-5" of lift, 10-12" of travel and ride smoother than any other lifted suspension.

[rocklaurence]

Checkout the video on the Long Spring FSSR
https://www.youtube.com/watch?v=LjMELrJc-Ro&t=118s

[rocklaurence]

Getting close to selling #100

[rocklaurence]

I have a new product available. A high clearance U-bolt plate for FSJ front axles. I have two models. One with sway bar studs and another Universal without sway bar studs. I'm using an Unfinished product to start and then fully weld the seams and install the studs. I also added more material to the bottom to protect the spring center pin. https://rocklaurencevintageautoparts...-sway-bar-stud

[rocklaurence]

I also have a Universal High Clearance Spring plate. Here: https://rocklaurencevintageautoparts...6-d6013da7db02

[rocklaurence]

The FSSR is a great product and now you can add Long Springs [53"] with rear Slider Boxes for a 5" lift that rides better than OEM!