Here you go Matt. I thought I would respond here instead of the PM. Maybe it will help someone else in the future also.
The speedo cluster and heater controls are held in with a spring loaded clip or clips. The trim ring is held in with the green speed nut. Same as the other side around the speaker.
The speaker is held by a metal bracket with hex screws and you can see that here.
The vent knobs are held by a metal retaining clip just like the brake hoses but a smaller version.
The ignition switch is a spring loaded switch that twists to unlock two small tabs in the bezel. A new one in the hand will show that well.
The headlight switch is held in with a small nut and bezel.
Hope that helps.