Okay go easy on me here. This is the first time I have done anything other than check the fluid on an auto trans. I am in the process of changing the fluid and filter.
I have a TH400
Fluid is drained, pan is off, filter is off and the floor is a mess.
Installing new filter and tightening the bolt but it seems to stop without holding the filter snuggly in place. I seem to have about 1/2 inch or less of play. Is this correct or am I missing a spacer between the trans and filter?
I have a TH400
Fluid is drained, pan is off, filter is off and the floor is a mess.
Installing new filter and tightening the bolt but it seems to stop without holding the filter snuggly in place. I seem to have about 1/2 inch or less of play. Is this correct or am I missing a spacer between the trans and filter?
Comment