I just finished making one. Suppose I should post up a foto but I haven't taken any.
Basically a square tube with a receiver cut/welded into the center and 2 rails that bolt onto the frame rails.......... The receiver will exit just below the factory bumper. I'll try to get to a foto tomorrow. Not really a big deal to make one if you weld.
OK then, Here is a link to fotobucket pics. http://s1116.photobucket.com/user/it...20Hitch%202013
The hitch isn't yet installed as the bed is about to be removed in order to do some frame detailing and (repair?) I hope not!
If the PM's are full,...try e mail!
616 four 03 44 0 five
'78 J-20 401 Q/T not quite stock anymore....Frame off Resto Mod..Super Cab nearing completion. SOMEDAY
"90 GW 360/727/229/3:31s 2" lift (SOLD in 2015)
'78 CJ7 Built from Scratch over a 7 year span.