 |
|

09-23-2020, 07:38 PM
|
258 I6
|
|
Join Date: Mar 12, 2015
Location: Oregon
Posts: 271
|
|
Is this prissy?
Don't know if this belongs here, but makes me pretty happy!
Not all of the headliner board sag came out, and the plaid doesn't line up between the two panels. Much better than the stapled old headliner up there.
Has anyone had any success with some sort of adhesive blocks or some other approach to reduce the sag? Tried velcro tape but the roof ribs are too deep for it to stick.

__________________
1984 GW
360
Comp 260H
Magnum Roller Rockers
Wiseco -21cc Forged Pistons
Performer Intake
Holley SA 670
MSD 8523
Dakota Digital custom cluster
Serehill headlamp harness
NWMP aux tank
1987 GW deceased
...but the parts live on
|

09-24-2020, 12:56 PM
|
 |
304 AMC
|
|
Join Date: Jul 25, 2016
Location: Benson. NC
Posts: 1,651
|
|
mine in the 88 wagoner has droops in the same area....
I did not try to remove them,....it is light tan.
although some have had success wetting the board and adding weights,....
too late for that, it looks fine,...
you posted in the right section.....
the GW's as you know have shown up in many Ralph Lauren/polo ads over the years....and the plaid fits right into that niche.
NICE WAGONEER...love the original "shag" pile carpet...would make Austin powers "randy"...
dave in NC 
__________________
SOLSAKS - dave
1976 J-10 HONCHO Fleetside
1982 J-10 Fleetside
1988 grand wagoneer
2004 RUBICON jeep
Benson, NC
|

09-25-2020, 05:41 PM
|
 |
hey,does anyone here know how to.......
|
|
Join Date: Jul 30, 2000
Location: WA State
Posts: 4,528
|
|
mine does exactly the same - stupid roof gaskets 
__________________
Abort? Retry? Ignore? >
86 GrandWag. Howell fuel Injected 360. MSD Ignition + Dizzy. 727/229 swap BJ's 2" Lift and 31's
88 Wrangler 4.2, Howell TBI and MSD - Borla Headers w/ Cat-back + winch and 31's AND a M416 trailer (-:
|

09-30-2020, 03:38 PM
|
 |
Administrator
|
|
Join Date: Oct 31, 2016
Location: Camarillo, CA
Posts: 3,970
|
|
Quote:
Originally Posted by Tripwire
...stupid roof gaskets 
|
I am not sure why AMC went the way they did attaching the roof racks. TERRIBLE design. They leak, they are not strong, and they are kind of a PITA to put on. (facepalm)
I LLOOOOooooove you headliner, Mr. Johnsonic. I have nothing of value to add; just me coveting.
__________________
79 Cherokee Chief (passed CA smog check Sept 2020) 
( Cherokee Build Thread)
11 Nissan Pathfinder Silver Edition 4x4
09 Mazdaspeed3 Grand Touring
|

10-01-2020, 01:32 PM
|
258 I6
|
|
Join Date: Mar 12, 2015
Location: Oregon
Posts: 271
|
|
Weirdly - there were no water marks on the headliner board & no evidence of leaks from those wellnuts. I think it could have just been 35 years of gravity to make the sag.
I totally agree with hating the way the rack is attached! After knowing how that thing is held on, will never ever tie anything substantial up there.
__________________
1984 GW
360
Comp 260H
Magnum Roller Rockers
Wiseco -21cc Forged Pistons
Performer Intake
Holley SA 670
MSD 8523
Dakota Digital custom cluster
Serehill headlamp harness
NWMP aux tank
1987 GW deceased
...but the parts live on
|

10-02-2020, 07:55 AM
|
 |
304 AMC
|
|
Join Date: Jul 25, 2016
Location: Benson. NC
Posts: 1,651
|
|
On my luggage rack on the GW
during installation
each screw and or well nut that came thru roof
got sealant on screw thread
and a wad of 3M Strip caulk
( black tar type material stays supple for many years )
under the roof,... stuck it on the screws, etc. formed it tight to roof and screw
with my hand.
even around the well nuts,...
totally sealed them up
I agree, years of gravity prob helped that sagging along...
__________________
SOLSAKS - dave
1976 J-10 HONCHO Fleetside
1982 J-10 Fleetside
1988 grand wagoneer
2004 RUBICON jeep
Benson, NC
|

10-25-2020, 11:56 AM
|
 |
304 AMC
|
|
Join Date: Jun 28, 2002
Location: Hot Springs, Arkansas
Posts: 2,038
|
|
In response to your original question in your title: yep, that headliner is kinda prissy!
__________________
Jim C
'67 J3000 Dually
'86 J20
'79 CJ5(in pieces)
'86 CJ7 Doesn't need anything(so why do I have it?)
Correction- it just needed a water pump!
|

11-29-2020, 07:24 PM
|
230 Tornado
|
|
Join Date: Nov 19, 2019
Location: TEXAS!
Posts: 13
|
|
Mulling something along those same lines for mine! great job. Where did you find the fabric?
Quote:
Originally Posted by johnsonic
Don't know if this belongs here, but makes me pretty happy!
Not all of the headliner board sag came out, and the plaid doesn't line up between the two panels. Much better than the stapled old headliner up there.
Has anyone had any success with some sort of adhesive blocks or some other approach to reduce the sag? Tried velcro tape but the roof ribs are too deep for it to stick.

|
|

12-02-2020, 07:28 AM
|
258 I6
|
|
Join Date: Mar 12, 2015
Location: Oregon
Posts: 271
|
|
Just went to the local fabric mart, found a pattern I liked, and got enough to use. It's actually not headliner fabric, pretty thick with a coarse weave. We'll see how it holds up 10 years from now, curious if the weight will make it go droopy.
__________________
1984 GW
360
Comp 260H
Magnum Roller Rockers
Wiseco -21cc Forged Pistons
Performer Intake
Holley SA 670
MSD 8523
Dakota Digital custom cluster
Serehill headlamp harness
NWMP aux tank
1987 GW deceased
...but the parts live on
|

12-02-2020, 07:15 PM
|
 |
hey,does anyone here know how to.......
|
|
Join Date: Jul 30, 2000
Location: WA State
Posts: 4,528
|
|
__________________
Abort? Retry? Ignore? >
86 GrandWag. Howell fuel Injected 360. MSD Ignition + Dizzy. 727/229 swap BJ's 2" Lift and 31's
88 Wrangler 4.2, Howell TBI and MSD - Borla Headers w/ Cat-back + winch and 31's AND a M416 trailer (-:
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 11:26 PM.
|