Looking for diffarent bed ideas/pics

[elbastardo]

Im close to picking up my next j truck and I want to do A custom bed. Im looking for some ideas and input

Im thinking something flatbedish with offroad aspects in mind. But my options are open


Thanks

[J20 project]

As the old saying goes, the world is your tomato.


Make what you will...it's all good.

J20

[elbastardo]

That is very much along the lines I was thinking. There is allot of attention to detail there I would like some stub sides that could be used as storage. The tiedowns on the sides of yours will probably find there way into mine

[FSJK]

http://www.ifsja.org/forums/vb/showthread.php?t=129320

[REDONE]

Originally Posted by elbastardo

That is very much along the lines I was thinking. There is allot of attention to detail there I would like some stub sides that could be used as storage. The tiedowns on the sides of yours will probably find there way into mine

If I recall correctly, those aren't tie downs, those a pop-up stake bed sides! J20P, can we get that pic again, I can't find it!

[J20 project]

Actually a combination there. The side rails drop in,,and the tie down rails are permanent on the side.

The really cool parts of the bed are underneath though. I was able to ditch the stock tank(junk and small), built a 36ga unit flush w/ the bottom of the frame, and then slung a semi truck air tank crossways in the back and tie it into a compartment which has my air hose(york onboard), various tools, the slide in ball mount..etc.
The winch works great for pulling elk in,,,sidehilling to the extreme..
The side rails hook together as a atv ramp too.

J20