View Single Post
  #2  
Old 09-19-2014, 06:02 AM
Dirtfarmer's Avatar
Dirtfarmer Dirtfarmer is offline
232 I6
 
Join Date: Aug 14, 2012
Location: Nebraska, Scenery's not great, but the weathers bad.
Posts: 240
you looking for tank end or motor end,
There are two lines coming from the tank to the motor, A small 1/4 inch return and a 5/16 suction. At the motor end the the suction line goes to the inlet (barb) of the fuel pump. The outlet steel line of the fuel pump goes to the inlet of a filter with three barbs. the outlet of the filter has two barbs a small one which goes back to the the small return line going back to tank and the large one goes to the inlet of the Carb. Clear as Mud right. Pretty sure the tank only has two corresponding barbs
__________________
"The trouble with quotes on the Internet is that you can never know if they are genuine." --Abraham Lincoln
Reply With Quote