Originally Posted by tgreese
There should be a hole in the kick panel up under the dash that the antenna wire comes though. This goes into the inner fender area that forms the fresh air vents at your feet. If you have the wire going through there already, you could use the original wire to pull the new wire through the fender, or pull though a string or smaller wire that can be used to feed through the new antenna wire.
You're a much faster typer than me, Tim. I was just typing along the same line; adding to yours too...check that area for where your antenna wire might be hanging up, aktrapper, sometimes it gets caught on the lip of the hole or on the vent/cover itself if it's run through there.